Emergency lighting and exit sign installation, inspection, and repair services
Many of our services cater to protecting your property. However, our exit signs and emergency lighting are strictly for protecting human life and safety. Emergency lights, exit signs, and panic doors are some of the most important safety devices in your business. While fire alarm systems communicate an emergency and fire sprinklers extinguish fires, exit and emergency lights are designed to guide you and your employees to safety in the event of an emergency. Emergency and exit path lighting are required in all commercial buildings and are specifically designed to save lives. In the event of a power failure or other service interruption, your employees will utilize the emergency and exit lights to get to safety.
Eagle Safety Management offers life safety programs in accordance with NPFA Life Safety Code 101. This regulation requires all exit signs – emergency lights systems will illuminate for a minimum of 90 minutes when called to do so. Documents indicating that this test has been completed are required along with a monthly quick check of your units.
Maintenance Schedule
Monthly
Ensure emergency lighting is in its designated place
Inspect housing for physical damage
Conduct push test switch for 30 seconds
Verify lamps are illuminated and aimed in the correct direction
Maintain monthly log for inspection by the authority having jurisdiction (AHJ)
Annually
Conduct a thorough examination of the unit
Test the battery and lighting system for the required 90 minutes
Check the condition and voltage of the battery and verify manufacturer date
Check AC | DC lamps or bulbs for damage and proper operation
Verify Charging circuit is operational and working properly
Apply emergency lighting test label to each light upon completion
During Our Emergency Light Inspection, Our Technicians Will
Inspect the lighting system to determine whether it is in service and in satisfactory condition in accordance with NFPA standards
Conduct a complete test of the lighting system to ensure it will illuminate a minimum of 90 minutes (OSHA, NFPA, and NEC minimum standards)
Adjust the PC board float voltage to ensure an extended life of the batteries and other key components
Inspect all bulbs and lamp heads to ensure they are operational and meet lighting requirements
Clean all battery terminals and leads
Survey the emergency lights and exit signs for proper placement
Check the energy efficiency of the bulbs and lamps
Tag or label devices as required and perform all required record keeping
Identify potential detrimental site conditions that could compromise the performance of mechanical and/or electronic components of the system
Compile a complete report of the inspection, explaining any deficiencies and recommending corrective action in accordance with recognized codes for care and maintenance
Our compliance reporting system will keep a record of when inspections are due, so you never have to worry about being late on required inspections. We will automatically reschedule them for you.